| RKS.161.14.0844 SKF Slewing Ring Bearings | d:85,000 mm; B:22,000 mm; Bore Diameter (mm):85,000; Bearing number:6017ZZ; Size (mm):85x130x22; Width (mm):22,000; D:130,000 mm; C:22,000 mm; Outer Diameter (mm):130,000; |
| RKS.220541 SKF Slewing Ring Bearings | ID Chamfer Angle (B deg.):30; Shaft Size (ds) - 16 -0.016 / -0.034:16 0.016 / 0.034; Outer Diameter (mm):18; Bearing Type:straight; Bearing Length Tolerance (B tol.) - +0 / -0.30:+0 / 0.30; Bearing Outside Diameter, Nominal(Do):18.000; Wall Thickness (S3):1.005; Bearing Outside Diameter Tolerance (Do tol.):18.065 / 18.03; ID Chamfer Length (Ci):0.300; Bearing Bore after Mounting (di):16.058 / 15.99; |
| RKS.220941 SKF Slewing Ring Bearings | Width (mm):64; Bore Diameter (mm):95; Outer Diameter (mm):170; Angle (α):25 °; Bearing number:7219 ADB; d:95 mm; a:108,5 mm; Size (mm):95x170x64; D:170 mm; B1:64 mm; |
| L6-43E9ZD Rotek Slewing Ring Bearings | Bore Diameter (mm):140; C:22 mm; B:22 mm; Bearing number:16028; Outer Diameter (mm):210; D:210 mm; Weight:2,5 Kg; Size (mm):140x210x22; Basic static load rating (C0):84,8 kN; Width (mm):22; Basic dynamic load rating (C):79 kN; (Grease) Lubrication Speed:3060 r/min; d:140 mm; |
| L6-37E9ZD Rotek Slewing Ring Bearings | Designation SKF:VKBA 1337; Designation SNR:R151.12; Designation FAG:713667420; Designation SX:CX130; Bearing number:5112; |
| M6-39P1 Rotek Slewing Ring Bearings | Housing Bore Dia. (Dh):0.4694 / 0.4687; Shaft Dia., Nominal (d):0.3750; Bearing Length Tolerance (B tol.) - +.010 / -0.010:+.010 / 0.010; ID Chamfer Length (Ci):0.012; Bearing Outside Diameter, Nominal(Do):0.469; Average Clearance (Cd):0.0040; Shaft Size (ds):0.3648 / 0.3639; Material:Carbon steel shell w; Bore Diameter (mm):9,525; Bearing Length, Nominal (B):0.375; Bearing Bore after Mounting (di):0.3694 / 0.3667; |
| L4-13P9Z Rotek Slewing Ring Bearings | B:19 mm; D:72 mm; C:19 mm; d:20 mm; Outer Diameter (mm):72; Width (mm):19; Size (mm):20x72x19; Bore Diameter (mm):20; Bearing number:10404; |
| RKS. 111280101002 SKF Slewing Ring Bearings | Cage Type:Stamped Steel; R - Cone Backface To Clear Radius1:3.050 mm; Cg - Geometry Factor:0.141; Y - ISO Factor9:1.36; d:95 mm; Db - Cup Backface Backing Diameter:134.87 mm; Aa - Cage-Cone Backface Clearance:2.8 mm; G1 - Heat Generation Factor (Roller-Raceway):150; D:150 mm; Series:M719100; G2 - Heat Generation Factor (Rib-Roller End):36.1; Cone Part Number:JM719149; Cup Part Number:JM719113; e - ISO Factor8:0.44; |